CanoScan 3000 ex Driver Windows 7
CanoScan 3000 ex Driver Windows 7 - Nowadays, with the development of digital world, a lot of printed documents are preferred to be sent via e-mail, thus the need for scanners is increasing. Canon, the leading manufacturer of electronic devices, released CanoScan 3000 ex to accommodate this increasing demands. Using cold cathode fluorescent lamp as its light source and CCD as its scanning element, the scanner offers great maximum optical resolution with 1200 x 2400 dpi, especially for office needs. The power consumption is very efficient, only 15 watts during operation and 5 watts during standby mode.
CanoScan 3000 ex is compatible with Windows 98 and above. The size is very compact, with only 61 x 460 x 257 mm in height, depth, and width respectively, and 2.4 kg in weight. It does not occupy too much spaces in your room and you can also move it around effortlessly. The speed is quite fast, with 4 msec per line for 600 dpi, and 8 msec per line for 1200 dpi, both monochrome and color scanning.
CanoScan 3000 ex is equipped with USB port as its connectivity. As for the scanning gradation, it is able to handle 48 bit input and 24 bit output for color documents, and 16/8 bit for greyscale documents.
Specification Canon CanoScan 3000 ex
| General | |
| Type | Flatbed scanner |
| Max Supported Document Size | 8.5 in x 11.7 in |
| Nominal Voltage | AC 120 V |
| Frequency Required | 60 Hz |
| Power Consumption Operational | 15 Watt |
| Max Document Size | 8.5 in x 11.7 in |
| Supported Document Type | Plain paper, bulk objects (such as books) |
| Document Feeder Type | Manual |
| Peripheral / Interface Devices | CD-ROM |
| Optical Resolution | 1200 dpi x 2400 dpi |
| Interface Type | USB 2.0 |
| Interpolated Resolution | 9600 dpi x 9600 dpi |
| Scan Element Type | CCD |
| Document Size Class | A4/Letter |
| Max Supported Document Size | 8.5 in x 11.7 in |
| Color Depth | 48-bit color |
| System Requirements Details | Windows 2000/ME/XP – 566 MHz – RAM 128 MB (USB 2.0) Windows 2000/ME/XP – 233 MHz – RAM 128 MB (USB) Windows 98 – 233 MHz – RAM 128 MB (USB) |
| Software Included | Drivers & utilities, CanoScan Toolbox CS, ArcSoft PhotoStudio, ScanGear CS, ScanSoft OmniPage SE |
| Interface | USB 2.0 |
| Connector Type | Type B |
| Brand | Canon |
| Product Line | Canon CanoScan |
| Processor Speed | 233 Hz, 566 Hz |
| Min RAM Size | 128 MB |
| Packaged Quantity | 1 |
| Type | Drivers & Utilities |
CanoScan 3000 ex Driver Windows
Operating System Support
|
Download
|
|---|---|
3000ex Scanner Driver Ver. 8.3.1.0a_xp (Windows 7/Vista/XP/2000)
|
|
3000ex Scanner Driver Ver. 8.3.1.0a (Windows 98/Me)
|
|
DelDrv Ver. 2.0.11.0 (Windows 7/Vista/XP/2000/Me/98)
|
|
CanoScan Toolbox Ver. 4.1.3.6 (Windows 7/Vista/XP/2000/Me/98)
|
|
CanoScan 3000/3000F/3000ex Quick Start Guide
|
|
CanoScan 3000/3000F/3000ex Scanning Guide
|
CanoScan 3000 ex Download / Installation Procedures
- Click the link, select [ Save ], specify "Save As", then click [ Save ] to download the file.
Memo:
If you select [ Run ] ( or [ Open ] ) instead of [ Save ], the file will be automatically installed after it is saved.
- The downloaded file will be saved in the specified place in the self-extracting form ( .exe format ).
- Double-click the downloaded EXE file to decompress it, then installation will start automatically.
Before installation CanoScan 3000 ex Scanner Driver, you should check in advance the specification to use tools such as the operating system and the type of scanner that you use on your Pc or laptop!
Comments
Post a Comment